BOTPLANNER L5
WHERE PRECISION MEETS ART
CONFIGURATIONS SL / PRO / PRO-XL sprayer options

Sprayer configurations under evaluation.

The goal is to support multiple sprayer options for drywall mud spraying. Specs shown are integration targets and will be validated in field testing. Layout is organized into three tiers: SL, PRO, and PRO-XL.

Configurations

Three-tier layout: SL (baseline), PRO (partner-aligned), PRO-XL (high-output platform).

SL
Baseline configurations (DINO + TALENCO) for early integration and broad site fit.
SL
DINO-POWER
MODEL: X51L
SL
Flow
1.35 GPM
Tip
0.037"
Pressure
3045 PSI
Power / Voltage
3000W / 120V
  • Baseline 120V option with standard drywall coverage tip.
  • Good for early integration validation and broad site compatibility.
TALENCO
MODEL: TL-R750
SL
Flow
2.43 GPM
Tip
0.049"
Pressure
3300 PSI
Power / Voltage
4000W / 220V
  • High-flow option for heavier texture and larger tip operation.
  • Best suited to 220V sites where higher power is available.
PRO
GRACO-aligned configurations (Mark V / Mark VII) for partner evaluation and loaner objectives.
PRO
GRACO
MODEL: MARK V
PRO
Flow
1.35 GPM
Tip
0.039"
Pressure
3300 PSI
Power / Voltage
2088W / 120V
  • Partner-aligned configuration option for evaluation.
  • Lower power draw can improve battery run-time.
GRACO
MODEL: MARK VII
PRO
Flow
1.59 GPM
Tip
0.047"
Pressure
3300 PSI
Power / Voltage
1900W / 230V
  • Higher output configuration option (partner-aligned).
  • 230V configuration for jobs where higher-voltage power is available.
PRO-XL
High-output GRACO platform with uptime and productivity features.
PRO-XL
GRACO
MODEL: MARK XV
PRO-XL
Flow (120V)
2.5 GPM
Flow (230V)
2.8 GPM
Recommended Tip
0.053"
Power (planning)
3500W
  • XT Motor Power — gas-like performance from any outlet
    • High-torque, low-RPM design delivers consistent output for heavy materials
    • Dual voltage flexibility: runs on 120V or 230V
    • Quiet electric operation for indoor, occupied, and extended-hour work
  • AMPLIFI™ Technology — more power, more productivity
    • Up to 50% more usable power from the same outlet
    • Selectable amperage helps prevent nuisance tripping on any breaker
  • Endurance™ Vortex Pump + ProConnect™ — built for uptime
    • Oversized passages handle plaster, Level 5, joint compound, and heavy mixes
    • ProConnect lets you swap pumps in minutes to keep crews spraying
  • TurboClean™ + WatchDog™ Protection — clean fast and protect your investment
    • Clean 3× faster using less fluid
    • WatchDog automatically shuts down to help prevent costly damage

Note: Feature list shown for partner evaluation and platform alignment. Final integration depends on field validation.

Run-Time Estimates

Estimates assume 48V battery system, inverter efficiency η = 0.90, and average spray duty = 40%. Auxiliary loads not included.

Model Power 100Ah 150Ah 200Ah
DINO X51L 3000W 3.60 h 5.40 h —
TALENCO TL-R750 4000W 2.70 h 4.05 h —
GRACO Mark V 2088W 5.17 h 7.76 h 10.34 h
GRACO Mark VII 1900W 5.68 h 8.53 h 11.37 h
GRACO Mark XV 3500W (planning) 3.09 h 4.63 h 6.17 h

Formula: hours = (48V × Ah × 0.90) / (Power(W) × 0.40). Values shown are estimates to be validated on-site.

Daily Productivity

Target ranges (prototype goal). Final values will be validated with measured idle time and field cycle data.

Function Target Output Typical Drivers
SANDING 3,000 – 6,000 sqft/day Dust extraction, edge detail, obstacle density, and repositioning frequency.
PAINTING / SPRAYING 6,000 – 12,000 sqft/day Material viscosity, tip size, hose length, trigger duty, and refill cycle time.
SKIMMING 2,000 – 4,500 sqft/day Blade width, pass strategy, correction passes, and corner handling.

Validation formula: sqft/day = (effective pass width × travel speed × effective duty) × hours/day.

Need battery + inverter sizing per configuration?

We can include auxiliary loads and measured duty-cycle assumptions for job-site validation.

Request Details